Proceso de grabado seco de silicio monocristalino para aplicaciones en guías de onda coplanares

R. Leal-Romero, I.E. Zaldivar-Huerta, J.A. Re, noso-Hernández. , C. Re, es-Betanzo. , M.C. Ma, a-Sánchez. , M. Aceves-Mijares

Abstract


In this work, the anisotropic etching and the use of silicon rich oxide (SRO) are studied in order to improve the waveguide coplanar (CPW). Experimental results of dry etching of mono-crystalline silicon for application in CPW's using RIE/ICP reactor are presented. The contribution of the physical as much chemical components of dry etching is observed. The reactive gases that are used are Sulfur hexafluoride (SF$_{6}$) mixed with oxygen (O$_{2}$). For etching the silicon masks of photo-resist and silicon oxide (SiO2) are used, this last one is obtained by atmospheric pressure chemical vapor deposition (APCVD). Speed of etching from 2.8 to 3.4 $\mu $m/min are obtained when using SiO$_{2}$ as mask.

Keywords


Mono-crystalline silicon; coplanar waveguide (CPW); dry etching; SRO

Full Text:

PDF

Refbacks

  • There are currently no refbacks.


Revista Mexicana de Física

ISSN: 2683-2224 (on line), 0035-001X (print)

Bimonthly publication of Sociedad Mexicana de Física, A.C.
Departamento de Física, 2o. Piso, Facultad de Ciencias, UNAM.
Circuito Exterior s/n, Ciudad Universitaria. C. P. 04510 Ciudad de México.
Apartado Postal 70-348, Coyoacán, 04511 Ciudad de México.
Tel/Fax: (52) 55-5622-4946, (52) 55-5622-4840. rmf@ciencias.unam.mx