Optimization of electrical conductivity of SnS thin film of 0.2 < t ≤ 0.4 μm thicknes for field effect transistor application

T. O. Daniel, U. E. Uno, K. U. Isah, U. Ahmadu

Abstract


This study is focused on the investigation of SnS thin film for transistor application. Electron trap which is associated with grain boundary effect affects the electrical conductivity of SnS semiconductor thin film thereby militating the attainment of the threshold voltage required for transistor operation. Grain size and grain boundary is a function of a semiconductor’s thickness. SnS semiconductor thin films of 0.20, 0.25, 0.30, 0.35, 0.40 μm were deposited using aerosol assisted chemical vapour deposition on glass substrates. Profilometry, Scanning electron microscope, Energy dispersive X-ray spectroscopy and hall measurement were used to characterise the composition, microstructure and electrical properties of the SnS thin film.  SnS thin films were found to consist of Sn and S elements whose composition varied with increase in thickness. The film conductivity was found to vary with grain size and grain boundary which is a function of the film thickness. The SnS film of 0.4 μm thickness shows optimal grain growth with a grain size of 130.31 nm signifying an optimum for the as deposited SnS films as the larger grains reduces the number of grain boundaries and charge trap density which allows charge carriers to move freely in the lattice thereby causing a reduction in resistivity and increase in conductivity of the films which is essential in obtaining the threshold voltage for a transistor semiconductor channel layer operation. The carrier concentration of due to low resistivity of 3.612 ×105 Ωcm of 0.4 μm SnS thin film thickness is optimum and favours the attainment of the threshold voltage for a field effect transistor operation hence the application of SnS thin film as a semiconductor channel layer in a field effect transistor.


Full Text:

PDF

References


REFERENCES

Du, H., Lin, Xi., Xu, Z., & Chu, D. (2015). Electric double layer field effect transistors: a review of recent progress. Review springer.doi:10.1007/s10853-015-9121-y

Yuan, H., Liu, H., & Shimotani, H. (2011). Liquid gated ambipolar transport in ultrathin films of a topological insulator Bi2Te3. Nano letters, 11, 2601-2605.

Thiruramanathan, P., Hikku, G.S., Krishna-Sharman, R., & Siva Shakthi, M. (2015). Preparation and characterisation of indium doped SnS thin films for solar cell applications. International journal of technochem research, 1(1), 59-65.

Hedge, S.S., Kunjomana, A.G., Chandrasekharam, K.A., Ramesh, K., & Prashantha, M. (2011). Optical and electrical properties of SnS semiconductor crystals grown by physical vapour deposition technique. Physica B 406 (2011) 1143-1148. doi.10.1016/j.physb.2010.12.068

T.O. Daniel, Uno EU, K.U. Isah and U. Ahmadu, EEJP, 3, 71-80 (2019), https://doi.org/10.26565/2312-4334-2019-3-09.

Sugaki, A., Kitakaze, A., & Kitazawa, H. (1985).Synthesized tin and tin-sulfide minerals; Synthetic sulfide minerals (XIII), Science Reports of the Tohoku University 16(3), 1985, pp. 199–211.

Ilican, I., Caglar, Y., & Caglar, M. (2008).Preparation and Characterization of ZnO Thin Films Deposited by Sol-gel spin coating method. Journal of Optoelectronics and Advanced Materials, 10(10), 2578-2583.

Ahmed, S.M., Latif, L.A., & Salim, A.K. (2011). The effect of substrate temperature on the optical and structural properties of Tin sulphide thin films. Journal of Basrah research (sciences), 37, 1-6.

Lv, J., Zhou, Z., Wang, F., Liu, C., Gong, W., Dai, J., Chen, X., He, G., Shi, S., Song, X., Sun, Z., & Liu, F. (2013). Effect of annealing temperature and CuO on microstructure and optical band gap of CuxZn1-xO thin films. Super lattices and microstructures, 61(2013) 115-123. doi.org/10.1016/j.spmi.2013.06.010

Gomez, A., Martinez, H., Calixto-Rodriguez, M., Avellaneda, D., Reyes, P.G., & Flores, O. (2013). A study of the structural, optical and electrical properties of SnS thin films modified by Plasma. Journal of materials science and engineering, 33 (6), 2013, 352-358.

Prathap, P., Revathi, N., Subbaiah, S., & Reddy, K.T.R. (2008). Thickess effect on the microstructure, morphology and optoelectronic properties of ZnS films, Journal of Physics: condense matter, 20, 035205-035215.

Jain, P., & Arun., P. (2013). Parameters influencing the optical properties of SnS thin films. Journal of semiconductors, 34 (9), 1-6.

Devika, M., Koteeswara, N.R., Ramesh, K., Gunasekhar, K.R., Gopal, E.S.R., & Ramakrishna, R.K.T. (2006). Influence of annealing on the physical properties of evaporated SnS films. Semiconductor science and technology, 21, 1125-1131.

Moreh, A.U., Momoh, M., Yahaya, H.N., Hamza, B., Saidu, I.G., & Abdullahi, S. (2014). Effect of thickness on structural and electrical properties of CuAlS2 thin films grown by two stage vacuum thermal evaporation technique. International journal of mathematical, computational, physical and computer engineering, 8(7), 1084-1088.

Jain, A., Sagar, P., & Mehra, R.M. (2007). Changes of structural, optical and electrical properties of sol-gel derived ZnO films with their thickness. Materials science-poland, 25 (1) 2007, 233-241.

Rasband, W.S. (2014). ImageJ, National institute of health, Bethesda, Maryland, USA, http://imagej.nih.gov/ij/1997-2014

Julio, G., Merindano, M.D., Canals, M., & Rallo, M. (2008). Image processing techniques to quantify micro projections on outer corneal epithelial cells. Journal of anatomy, 212, 879-886. doi:10.1111/j.1469-7580.2008.00898.X

Reddy, T.S., & Kumar, M.C. (2016). Co-evaporated SnS thin films for visible light photo detector applications. Royal society of chemistry, 2016, 6, 95680-95692. doi: 10.1039/c6ra20129f.

Gao, C., & Shen, H. (2012). Influence of the deposition parameters on the properties of orthorhombic SnS films by chemical bath deposition. Thin solid films, 2012, 520, 3523-3527.




DOI: https://doi.org/10.31349/RevMexFis.67.263

Refbacks

  • There are currently no refbacks.


REVISTA MEXICANA DE FÍSICA, year 67, issue 2, March-April 2021. Bimonthly Journal published by Sociedad Mexicana de Física, A. C. Departamento de Física, 2º Piso, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad Universitaria, Alcaldía Coyacán, C.P. 04510 , Ciudad de México. Apartado Postal 70-348. Tel. (+52)55-5622-4946, https://rmf.smf.mx/ojs/rmf, e-mail: rmf@ciencias.unam.mx. Chief Editor: José Alejandro Ayala Mercado. INDAUTOR Certificate of Reserve: 04-2019-080216404400-203, ISSN: 2683-2224 (on line), 0035-001X (print), both granted by Instituto Nacional del Derecho de Autor. Responsible for the last update of this issue, Technical Staff of Sociedad Mexicana de Física, A. C., Fís. Efraín Garrido Román, 2º. Piso, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad Universitaria, Alcaldía Coyacán, C.P. 04510 , Ciudad de México. Date of last modification, March 1st., 2021.

The responsibility of the materials published in Revista Mexicana de Física rests solely with their authors and their content does not necessarily reflect the criteria of the Editorial Committee or the Sociedad Mexicana de Física. The total or partial reproduction of the texts hereby published is authorized as long as the complete source and the electronic address of the publications are cited.

There is no fee for article processing, submission or publication.

Revista Mexicana de Física by Sociedad Mexicana de Física, A. C. is distributed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License