Rediseño, análisis y simulación mecánica del comportamiento de una lente sólida elástica SEL de apertura máxima
DOI:
https://doi.org/10.31349/RevMexFis.59.6.545Keywords:
Solid elastic lens, tunable lens, mechanical design of tunable lensAbstract
One type of adaptive lens known as the Solid Elastic Lens (SEL) is composed mainly of PDMS sylgar 184 elastic body and a mount made of aluminum. Radial forces can be applied to this elastic body thereby allowing the geometric parameters of the lens to change. Previous studies reported the construction and the optical performance of a SEL; the mount of this lens has some inconvenient mechanical drawbacks which cause additional aberrations in the image produced when the entire aperture of the lens is considered. In order to improve the performance of this type of adaptive lens, a study is presented of the optimization and redesign of the mechanical mount to enable the radial forces applied to be more homogenous on the elastic material for maximum aperture of the SEL, as shown in the results of the mechanical analysis done in Solidwork$^{\mbox{\textregistered }}$.Downloads
References
N. Sugiura and S. Morita, Appl. Opt. 32 (1993) 4181-4186 DOI: https://doi.org/10.1364/AO.32.004181
B. Berge and J. Peseux, Eur. Phys. J. E3 (2000) 159–163 DOI: https://doi.org/10.1007/s101890070029
L Dong, A K. Agarwal, D J. Beebe & H Jiang, NATURE 442 (2006) 551-554 DOI: https://doi.org/10.1038/nature05024
W. Zhang, K. Aljasem, H. Zappe, and A. Seifert, Opt. Express 19 (2011) 2347-2362 DOI: https://doi.org/10.1364/OE.19.002347
S. Xu, H. Ren, Y. J. Lin, M. G. J. Moharam, S.-T. Wu, and N. Tabiryan, Opt. Express 17 (2009) 17590-17595 DOI: https://doi.org/10.1364/OE.17.017590
N. Chronis, G. L. Liu, K.-H. Jeong, y L. P. Lee, Opt. Express 11 (2003) 2370–2378 DOI: https://doi.org/10.1364/OE.11.002370
R. Arriaga, “Diseño y construccion de un modelo optomecanico del ojo humano utilizando una lente adaptativa” Tesis de Licenciatura, 2008.
S.-Y. Lee, H.-W. Tung, W.-C. Chen, and W. Fang, Proc. IEEE 18 (2006) 2191-2193 DOI: https://doi.org/10.1109/LPT.2006.883891
A. Santiago, S. Vazquez, F. Iturbide, R. Arriaga, and J. Gonzalez, Proc. SPIE 7060 (2008) 706017 DOI: https://doi.org/10.1117/12.795699
A. Santiago, S. Vazquez, F. S. Granados, J. Gonzalez, E. Rueda, and M. Campos, Opt. Eng. 49 (2010) 123401
P. Liebetraut, S. Petsch, W. Monch, and H. Zappe, Appl. Opt. 50 (2011) 3268-3274 DOI: https://doi.org/10.1364/AO.50.003268
U. Karl, E. Steven, Product Design and Development (Mc Graw-Hill, 2008)
G. Pahl, W. Beitz, Engineering Design: A systematic approach (Springer, 1988)
L. D. Miles, Techniques of Value Analysis and Engineering 3ed. (Wendt Commons Library, 1989)
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Revista Mexicana de Física
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors retain copyright and grant the Revista Mexicana de Física right of first publication with the work simultaneously licensed under a CC BY-NC-ND 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
