Sinergia entre la corrosión erosión del acero 1045 recubierto por multicapas de TiN/TiAlN

Authors

  • W. Aperador
  • C. Ramírez-Martin
  • J. Bautista Ruiz

Keywords:

Titanium-aluminum nitride, corrosion dynamics, corrosion erosion, erosion, scanning electron microscopy

Abstract

This paper presents the results of the evaluation to the resistance to dynamic corrosion, erosion and corrosion-erosion at an impact angle of 90$^{\circ}$ of thin films in the form of multilayer TiN / TiAlN deposited with periods of 2, 6, 12 and 24 bilayers on substrates of AISI 1045 steel, through a system with rf reactive magnetron sputtering from Ti and Al targets of high purity (99.99%) in an atmosphere composed of Ar / N. The electrochemical characterization was carried out by using Tafel polarization curves and microstructural characterization by scanning electron microscopy. There was a significant decrease in the corrosion rate for the coated samples in terms of dynamic corrosion and corrosion-erosion. The sample covered by 24 bilayers had the best behavior in both situations, confirming a good performance of the bilayers to the resistance to corrosion and erosion corrosion. The results of scanning electron microscopy showed a good sealing of the bilayers, which confirms the protective effect given by the substrate coatings.

Downloads

Published

2011-01-01

How to Cite

[1]
W. Aperador, C. Ramírez-Martin, and J. Bautista Ruiz, “Sinergia entre la corrosión erosión del acero 1045 recubierto por multicapas de TiN/TiAlN”, Rev. Mex. Fís., vol. 57, no. 4, pp. 350–0, Jan. 2011.