The study of electro-optical properties of nanocomposite ITO thin films prepared by e-beam evaporation

Authors

  • M. Farahamndjou

Keywords:

ITO Nano-composite, crystallity, optical transmission, Thin Films

Abstract

Indium-tin oxide thin films are deposited on sods lime glass substrates using e-beam evaporation system. In order to improve the structural, electrical and optical properties of the films, these films were annealed in vacuum and different temperature. The structure, sheet resistance and optical transmission of the films were systematically investigated as function of post annealing temperature. It has been observed that the films take its maximum transmission and conductivity at annealing temperature 400$^{\circ}$C. The XRD and AFM analysis reveals that the amorphous films were oriented to $\langle 222 \rangle$ crystal texture direction with size of grains about 35-40 nm.

Downloads

Published

2013-01-01

How to Cite

[1]
M. Farahamndjou, “The study of electro-optical properties of nanocomposite ITO thin films prepared by e-beam evaporation”, Rev. Mex. Fís., vol. 59, no. 3, pp. 205–0, Jan. 2013.

Issue

Vol. 59 No. 3 (2013): Revista Mexicana de Física.

Section

Articles

License

Authors retain copyright and grant the Revista Mexicana de Física right of first publication with the work simultaneously licensed under a CC BY-NC-ND 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.