Optical and tribo-mechanical characterization in metal-ceramic multilayers coatings

Authors

  • A. González-Hernandez Instituto Tecnológico de Ciudad Madero
  • A. B. Morales Instituto Tecnológico de Ciudad Madero
  • J. C. Caicedo Universidad del Valle
  • N. C. Alba Universidad Autónoma de Occidente
  • R. Barragán Ramírez Universidad Autónoma de Tamaulipas
  • M. Flores Project Engineering Department, CUCEI, Universidad de Guadalajara, Jalisco, Mexico.

DOI:

https://doi.org/10.31349/RevMexFis.66.496

Keywords:

Multilayer, Optical and tribo-mechanical properties, Sputtering.

Abstract

Laboratory scale studies of tribological properties of nitride coatings are useful in predicting their protective wear behavior in cutting tools for industrial scale applications. Main aim of this research is to determinate optical and tribo-mechanical properties in multilayer coatings of metal-ceramic assigned as coatings A and B. These coatings were deposited by DC magnetron sputtering on carbon steel AISI 1060 using buffer adhesion layers of W, Ti/W/WN and TiN/TiN respectively. For to determinate molecules interactions of materials were analysed by means of Raman and FTR spectroscopies. The nanohardness, tribological and adhesion behaviour were studied by nanoindentation, pin on disk and a tribometer. The hardness and behaviour tribological, were obtained by Nano-indentation, pin on disk, and scratch test using a tribometer. FTIR and Raman analysis shown the formation of Ti metallic ion and WO3 mainly in both coatings. The hardness of coatings shown a slight improvement compared with the substrate. However, for industrial application this property should be increase. The behaviour of COF does not presented improvement. The mass loss and wear rate were high significantly due to the formation of cracks on surface coatings. Scratch analysis, it found three wear mechanics determined by the presence of irregular borders with sharp shadow, semicircle detachment in coatings and coatings detachment in the central track as the load increased.

Author Biographies

A. González-Hernandez, Instituto Tecnológico de Ciudad Madero

Center Investigation secondary in petrochemical, TecNM campus III, Park Tecnia (Pequeña y mediana Industria), Bahía Aldair Altamira Tamaulipas.

A. B. Morales, Instituto Tecnológico de Ciudad Madero

Center Investigation secondary in petrochemical, TecNM campus III, Park Tecnia (Pequeña y mediana Industria), Bahía Aldair Altamira Tamaulipas.

J. C. Caicedo, Universidad del Valle

Tribology, Powder Metallurgy and Processing of solid Recycling group (TPMR), Cali

N. C. Alba, Universidad Autónoma de Occidente

Mechanical Engineering, Materials Science and Engineering Group, Cali.

R. Barragán Ramírez, Universidad Autónoma de Tamaulipas

Laboratory materials, Faculty Engineering, campus Tampico-Madero, Tampico Tamaulipas.
Multilayers on steel carbon and silicon wafer

Downloads

Published

2020-07-01

How to Cite

[1]
A. González-Hernandez, A. B. Morales, J. C. Caicedo, N. C. Alba, R. Barragán Ramírez, and M. Flores, “Optical and tribo-mechanical characterization in metal-ceramic multilayers coatings”, Rev. Mex. Fís., vol. 66, no. 4 Jul-Aug, pp. 496–503, Jul. 2020.

Issue

Vol. 66 No. 4 Jul-Aug (2020): Revista Mexicana de Física

Section

10 Material Sciences

License

Authors retain copyright and grant the Revista Mexicana de Física right of first publication with the work simultaneously licensed under a CC BY-NC-ND 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.